...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define construction of bridge components. |
...
From Construction/Superstructure Construction, click Girder Erection (Complete).
...
...
| Info |
|---|
After clicking on ‘Construction> Superstructure Construction> Girder/Cross Frame Erection' in the navigation treeview, follow the steps to define the Girder/Cross Frame Erection. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Girder Erection (Complete) [SIG] |
| 1 |
|    | ||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the bridge is define in the next step. |  | ||||
| 3 |
| |||||
...
| |||||
...
| ||||
...
| |||||
Go to Girder Erection (Complete) under Superstructure Construction on the tree view.
Copy Girder Construction from model inputs and paste into OpenBrIM.
...
Girder Erection (Complete)
Girder Construction
| 4 |
|  |
| 5 |
|  |
| 6 | Proceed to the next step to verify the model. | |
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed girder/cross frame erection is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...