...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the below steps to add foundation. |
...
Go to Rectangular under Foundation on the tree view.
...
...
Click three-dots icon on Substructure.
...
Pick pier column/columns.
...
...
Edit Footing properties on the spreadsheet.
...
...
Click three-dots icon on Material and set a concrete material for footing.
...
Mesh size and number of strips for both directions can be entered in FEM tab.
...
...
| Info |
|---|
After clicking on 'Substructure> Foundation> Rectangular' in the navigation treeview, follow the steps to define the Rectangular Foundation. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Rectangular [SIG] |
...
Go back to Support Lines tab at the Bridge Geometry.
...
...
Enter the skew angle 30 for the Pier2. Internal parameter name used for skew angle is s_skew.
...
Go to Rotation parameter at the Rectangular Foundation tab.
...
...
Enter '=Pier2.s_skew'.
Rotation parameter is the same as skew parameter of the support lines.
...
...
| 1 |
|   | |||||
| 2 |
|  | |||||
| 3 |
|  | |||||
| 4 |
|  | |||||
| 5 |
|  | |||||
| 6 |
| ||||||
-20221025-115814.png?version=1&modificationDate=1667578420812&cacheVersion=1&api=v2)
...
| title | Quick Tip |
|---|
| Info |
|---|
Follow the below steps to link the inputs to each other. |
| 7 |
If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip. |    | ||||
| 8 |
| |||||
...
| |||||
...
| ||||
...
| |||||
...
Go to Rectangular under Foundation on the tree view.
...
Copy Footing from model inputs and paste into OpenBrIM.
...
Go to FEM under Rectangular on the tree view.
...
| Tip |
|---|
Completed rectangular footing is illustrated below. |
...
| 9 |
|  | |
| 10 |
|  | |
| 11 |
|  | |
| 12 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |  | |
| 13 | To model all the rectangular foundation, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | ||
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Rectangular Foundation | ||
|---|---|---|
Footing
|
...
|
...
|
...
FEM
| Code Block |
|---|
Footing1 Yes RigidSection 10.0000 3.0000 4.0000
Footing2 Yes RigidSection 10.0000 3.0000 4.0000 |
...
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed rectangular foundation are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |