Versions Compared

Version Old Version 16 New Version 17
Changes made by

Umut Nuhat Sevinc

Umut Nuhat Sevinc

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleBearing Fixity
Bearing Fixity [SIG]
1

(blue star) Click three-dots icon on Insertion Point cell and click Select.

Image Modified
2

(blue star) Select Insertion Point as a IP1 and Click OK.

Image ModifiedImage Modified
3

Insert excerpt
_Quick Tips
_Quick Tips
nameBearingFixity
nopaneltrue

4

(blue star) Keep the Tx as default.

Image Modified
5

(blue star) Click the three-dots icon on the Ty and Tz cell, and then set Fixed.

Image Modified
6

(blue star) Keep the Rx, Ry, Rz, Bearing Rotation and Transfer Forces to Substructure as default.

Image Modified
7

(blue star) Keep the bearing fixity name as default.

8

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

Image Modified
9

To model all the Bearing Fixity, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

Insert excerpt
_Quick Tips
_Quick Tips
nameCopyPasteInputs
nopaneltrue

...