Content Comparison

Click the three-dots icon on the Girder cell, and then set G4.

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the bolt property is set in the next step.

Go to the Bolt category.

Click the three-dots icon on the Web Bolt Property cell, and then set BoltWeb.

Click the three-dots icon on the Flange Bolt Property cell, and then set BoltFla.

Keep the Show Bolts(Detailing) as default.

Return to the Girder category and set name as Splice1.

Enter the Station as 118.7.

Enter the Gap Between Girders as 0.

Keep the Web Weld Size and Web Weld Clearance as default.

You can edit the Web Splice dimensions of Bolted Field Splice from Web Splice tab.
Please set the following parameter values:

• Plate Thickness : 0.3125

• # of Bolts (Horz.) : 2

• # of Bolts (Vert.) : 17

• Bolt Spacing (Horz.) : 3

• Bolt Spacing (Vert.) : 4.75

• Bolt Spacing @ Center : 4.5

• Bolt Edge Distance (Horz.) : 2

• Bolt Edge Distance (Vert.) : 1.75
  

Click three-dots icon on Plate Material cells and select a Material as A709 50W.

If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip.

You can edit the Top Flange Splice dimensions of Bolted Field Splice from Top Flange Splice tab.
Please set the following parameter values:

• Inner Plate Thickness : 0.6875

• Outer Plate Thickness : 0.625

• # of Bolts (Long.) : 3

• # of Bolts (Trans.) : 2

• Bolt Spacing (Long.) : 3

• Bolt Spacing (Trans.) : 3

• Bolt Spacing @ Center (Long.) : 3.75

• Bolt Spacing @ Center (Trans) : 6

• Bolt Edge Distance (Long.) : 2

• Bolt Edge Distance (Trans.) : 1.5

Click three-dots icon on Plate Material cells and select a Material as A709 50W.

You can edit the Bottom Flange Splice dimensions of Bolted Field Splice from Bottom Flange Splice tab.
Please set the following parameter values:

• Inner Plate Thickness : 0.875

• Outer Plate Thickness : 0.875

• # of Bolts (Long.) : 6

• # of Bolts (Trans.) : 2

• Bolt Spacing (Long.) : 3

• Bolt Spacing (Trans.) : 4

• Bolt Spacing @ Center (Long.) : 3.75

• Bolt Spacing @ Center (Trans) : 6

• Bolt Edge Distance (Long.) : 2

• Bolt Edge Distance (Trans.) : 2

Click three-dots icon on Plate Material cells and select a Material as A709 50W.

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.