| Info |
|---|
Follow the steps below after clicking on Superstructure > Steel Girders > Plate Girder in the navigation treeview |
| 1 | Click three-dots icon on Girder Layout cell and set a layout. | 
| |||||
| 2 | Edit the plate girder dimensions. To enter a station-dependent dimension; | ||||||
| 3 | Click three-dots icon on Top Flange Width cell and Edit (spreadsheet). | 
| |||||
| 4 | Define the station-dimension relationship on the spreadsheet. |  | |||||
| 5 | Top Flange Thickness, Web Depth and Thickness, Bottom Flange Width and Thickness, Haunch Thickness, and Additional Haunch Width Parameters can be defined similarly to Top Flange Width. | ||||||
| 6 | When encountering the warning as seen in OpenBrIM app, there is a "issue" , it is advised to review the parameters you have provided. This warning suggests that there might be a missing or incorrect parameter in your input. Check inputs to ensure they are accurate and complete. |  | |||||
| 7 |
| ||||||
| 8 | Click three-dots icon on Top Flange Material cells and select a Material. |   | |||||
| 9 | Web Material and Bottom Flange Material parameters can be defined similarly to Top Flange Material. | |
| 10 | You can edit the FE mesh settings of girders from FEA Settings tab. |  |