Versions Compared

Version Old Version 4 New Version 5
Changes made by

Umut Nuhat Sevinc

Umut Nuhat Sevinc

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#DEEBFF

Follow the next steps to define concrete deck.

1

Go to Concrete Deck on tree view.

2

Click three-dots icon on Cross Sections cell and Edit.

3

Select the Cross Section and enter values for the Offset from Support Line, Skew Angle, and Variation with Next Segment.

4

Import deck Material and assign it.

Image RemovedImage Removed5

Click three-dots icon on Girders cell and Edit.

Image Added
5

Select the Girders.

6

Click three-dots icon on Deck Reinforcement Data cell and Edit.

Image Added
7

Select the Deck Rebar Material, Long. Deck Rebar (Top) and Long. Deck Rebar (Bottom) and enter values for the Start Station, End Station, Rebar Spacing, Clear Cover and Concrete creep adjustment factor.

8

Enter the Taper, Continuous at Start, Continuous at End and Material.

Image Added
9
Expand
titleQuick Tip

You can view the previously imported materials in Properties->Materials on the tree view.

Do not forget to assign the related material for each case.

10

Go to 3D Settings tab to edit the Curve Refinement inputs.

Image Added

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
nameCopyPaste
nopaneltrue

1

Go to Concrete Deck under Deck on the tree view.

2

Copy General and 3D Settings from model inputs and paste into OpenBrIM.

Tip

Completed deck cross section is illustrated below.

Anchor
ModelInputs
ModelInputs

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
namePasteTip
nopaneltrue

Concrete Deck

General

Code Block
Deck1	[[Abut1, 0, DCS1, 0, 2],[Abut4, 0, DCS1,DCS2]	FcCube_4ksi, 0, 2]]	[G1,G2,G3,G4]	YES	NO	NO	Fc_4ksi	[[0, 6360, A615_60, 5, 5, ASTMA615No8, ASTMA615No6, 2, 3, 1]]

3D Settings

Code Block
Deck1	4.0000

Cross Sections

Code Block
Abut1	0.0000	DCS1	0.0000	Linear
Abut4	0.0000	DCS1	0.0000	Linear

Girders

Code Block
G1
G2
G3
G4

Deck Reinforcement Data

Code Block
0.0000	530.0000	A615_60	5.0000	5.0000	ASTMA615No8	ASTMA615No6	2.0000	3.0000	1.0000