| Info |
|---|
Please follow the instructions provided below to add F shape barriers to both sides of the bridge. |
| 1 | Navigate to Superstructure Attachments > F Shape Barrier |  | |||||
| 2 | The F barrier will be defined on both the left and right sides of the Deck object. Click three-dots icon on Deck cell and set Deck1 at twice. | ||||||
| 3 | Select the Orientation of the barriers on both sides as in the figure. |  | |||||
| 4 | Set the concrete Material of the barrier to Fc_4ksi. |  | |||||
| 5 | Enter Start Transverse Offset and End Transverse Offset as in the figure. |  | |||||
| 6 | Navigate to Dimension tab at spreadsheet. |  | |||||
| 7 | Enter the dimension parameters for F Shape Barrier as in the figure | ||||||
| 8 |
| ||||||
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Navigate to F Shape Barrier under Superstructure Attachments on the tree view. |
| 2 | Copy F Shape Barrier and Dimensions from model inputs and paste into OpenBrIM. |
...
| Tip |
|---|
The F Shape Barrier that have been created are illustrated below. |
...
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Anchor | ||||
|---|---|---|---|---|
|
F Shape Barrier | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
F Shape Barrier | Dimensions | ||||||||||
|
| ||||||||||