| Info |
|---|
Please follow the instructions provided below to create External Diapgrahm. |
| 1 | Navigate to Diaphragm > Custom Diaphragm Structural elements are used to ensure that the two Concrete U Girder work together structurally, and these element is the "External Diaphragm”. |  |
| 2 | Initially, choose the specific locations (Support Lines) where you intend to create "External Diaphragms" |  |
| 3 | Then click three-dots icon on Girders cell and pick the two Concrete U Girders (CUG1 & CUG2) between which the External Diaphragm will be placed. |  |
| 4 | Allocate the “Thickness” and “Material” properties to all the "External Diaphragms" that have been created. |  |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Navigate to External Diaphragm under Diaphragm on the tree view. |
| 2 | Copy External Diaphragm from model inputs and paste into OpenBrIM. |
...
| Tip |
|---|
The External Diaphragm that have been created are illustrated below. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Anchor | ||||
|---|---|---|---|---|
|
External Diaphragm | |||||
|---|---|---|---|---|---|
External Diaphragm | |||||
|