...
| Info |
|---|
Please follow the instructions provided below to set rebar detailing for Circle_prop_column |
...
From any cell of the Circle_prop_column row, click on three-dots icon to open Section Editor panel.
...
Click + icon at the left top side of the screen.
And Select Rebar
Navigate to the "Circular Layout" tab
Enter:
Profile: ASTMA615No11
Material: A615_60
Radius 1: 18
Radius 2: 18
# of Rebars (per Row): 20
# of Rows: 1
Click Add.
...
...
| Info |
|---|
Please follow the instructions provided below to set rebar detailing for Rectangle_exist_EBcap |
From any cell of the Rectangle_exist_EBcap row, click on three-dots icon to open Section Editor panel. |  | |||||
Click + icon at the left top side of the screen. And Select Rebar | ||||||
Navigate to the "Draw Rebar Points" tab Enter:
Click Add. Manually top position the rebar line within the section. And set data as follows:
Click Apply. | 
| |||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
|  | |||||
Repeat the previous steps to define the Rebar into the Section |
| |||||
Select Rebar
Click Add. Manually middle position the rebar line within the section. And set data as follows:
Click Apply. | ||||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
|  | |||||
Select Rebar Enter:
Click Add. Manually bottom position the rebar line within the section. And set data as follows:
Click Apply. |
| |||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
|  |
| Info |
|---|
Please follow the instructions provided below to set rebar detailing for Rectangle_prop_EB1cap |
From any cell of the Rectangle_prop_EB1cap row, click on three-dots icon to open Section Editor panel.
Click + icon at the left top side of the screen.
And Select Rebar
Navigate to the "Draw Rebar Points" tab
Enter:
# of Rebars (per Row): 4
# of Rows: 1
Click Add.
Manually top position the rebar line within the section. And set data as follows:
Profile: ASTMA615No9
Material: A615_60
Click Apply.
Click … icon shown on created rebar.
Click Points Spreadsheet.
Copy the data below.
| Code Block | ||
|---|---|---|
| ||
0.0000 15.5000
-13.5000 0.0000
13.5000 0.0000 |
Repeat the previous steps to define the Rebar into the Section
Select Rebar
# of Rebars (per Row): 2
# of Rows: 2
Click Add.
Manually middle position the rebar line within the section. And set data as follows:
Profile: ASTMA615No6
Material: A615_60
Click Apply.
Click … icon shown on created rebar.
Click Points Spreadsheet.
Copy the data below.
| Code Block | ||
|---|---|---|
| ||
0.0000 0.0000
-15.0000 0.0000
15.0000 0.0000 |
Select Rebar
Enter:
# of Rebars (per Row): 4
# of Rows: 1
Click Add.
Manually bottom position the rebar line within the section. And set data as follows:
Profile: ASTMA615No9
Material: A615_60
Click Apply.
Click … icon shown on created rebar.
Click Points Spreadsheet.
Copy the data below.
| Code Block | ||
|---|---|---|
| ||
0.0000 -15.5000
-13.5000 0.0000
13.5000 0.0000 |
...
| Info |
|---|
Please follow the instructions provided below to set rebar detailing for Rectangle_prop_EB4cap |
From any cell of the Rectangle_prop_EB4cap row, click on three-dots icon to open Section Editor panel. |  | |||||
Click + icon at the left top side of the screen. And Select Rebar | ||||||
Navigate to the "Draw Rebar Points" tab Enter:
Click Add. Manually middle position the rebar line within the section. And set data as follows:
Click Apply. | 
| |||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
|  | |||||
Select Rebar
Click Add. Manually middle position the rebar line within the section. And set data as follows:
Click Apply. |
| |||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
|
| Info |
|---|
Please follow the instructions provided below to set rebar detailing for PierCap_exist |
From any cell of the PierCap_exist row, click on three-dots icon to open Section Editor panel. |  | ||||
Click + icon at the left top side of the screen. And Select Rebar | |||||
Navigate to the "Draw Rebar Points" tab Enter:
Click Add. Manually top position the rebar line within the section. And set data as follows:
Click Apply. |
| ||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
| |||||
Navigate to the "Draw Rebar Points" tab Enter:
Click Add. Manually bottom position the rebar line within the section. And set data as follows:
Click Apply. |
| ||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
| |||||
Select Rebar
Click Add. Manually middle position the rebar line within the section. And set data as follows:
Click Apply. | 
| ||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
|
| Info |
|---|
Please follow the instructions provided below to set rebar detailing for PierCap_prop |
From any cell of the PierCap_prop row, click on three-dots icon to open Section Editor panel.
Click + icon at the left top side of the screen.
And Select Rebar
Navigate to the "Draw Rebar Points" tab
Enter:
# of Rebars (per Row): 9
# of Rows: 1
Click Add.
Manually top position the rebar line within the section. And set data as follows:
Profile: ASTMA615No11
Material: A615_60
Click Apply.
Click … icon shown on created rebar.
Click Points Spreadsheet.
Copy the data below.
| Code Block | ||
|---|---|---|
| ||
0.0000 15.5000
-20.5000 0.0000
20.5000 0.0000 |
Navigate to the "Draw Rebar Points" tab
Enter:
# of Rebars (per Row): 5
# of Rows: 1
Click Add.
Manually bottom position the rebar line within the section. And set data as follows:
Profile: ASTMA615No11
Material: A615_60
Click Apply.
Select Rebar
# of Rebars (per Row): 5
# of Rows: 2
Click Add.
Manually middle position the rebar line within the section. And set data as follows:
Profile: ASTMA615No6
Material: A615_60
Click Apply.
Click … icon shown on created rebar.
Click Points Spreadsheet.
Copy the data below.
| language | xml |
|---|
|
...