...
| Info |
|---|
Please follow the instructions provided below to set rebar detailing for PierCap_exist |
From any cell of the PierCap_exist row, click on three-dots icon to open Section Editor panel. |  | ||||
Click + icon at the left top side of the screen. And Select Rebar | |||||
Navigate to the "Draw Rebar Points" tab Enter:
Click Add. Manually top position the rebar line within the section. And set data as follows:
Click Apply. |
| ||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
| |||||
Navigate to the "Draw Rebar Points" tab Enter:
Click Add. Manually bottom position the rebar line within the section. And set data as follows:
Click Apply. |
| ||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
| |||||
Select Rebar
Click Add. Manually middle position the rebar line within the section. And set data as follows:
Click Apply. | 
| ||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
|
...
| Info |
|---|
Please follow the instructions provided below to set rebar detailing for PierCap_prop |
From any cell of the PierCap_prop row, click on three-dots icon to open Section Editor panel. |  | ||||
Click + icon at the left top side of the screen. And Select Rebar | |||||
Navigate to the "Draw Rebar Points" tab Enter:
Click Add. Manually top position the rebar line within the section. And set data as follows:
Click Apply. |
| ||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
| |||||
Navigate to the "Draw Rebar Points" tab Enter:
Click Add. Manually bottom position the rebar line within the section. And set data as follows:
Click Apply. |
| ||||
Select Rebar
Click Add. Manually middle position the rebar line within the section. And set data as follows:
Click Apply. |
| ||||
Click … icon shown on created rebar. Click Points Spreadsheet. Copy the data below.
|
...