...
| 1 | At this stage, we will choose either the pier cap or the end bent for the code check. For this case, "PierCap1" will be selected. Here we will determine the start, middle and end regions as reference distances to analyze and evaluate the critical results. Also, "EndBent1" will be selected for checking only the code of the flexural calculation. | |||||
| 2 | Navigate to Substructure Code Checks > Pier Cap Code Check |
| ||||
| 3 | Click three-dots icon on Pier Cap Select as 3 times PierCap1 and PierCap2 once for code check. Enter names as in the figure. | |||||
| 4 | Assign “Code Check Templates” as in the follows
Also enter the relevant section data for the pier caps. | 
| 5 | 6 | 7 | |
