| Info |
|---|
Please follow the instructions provided below to define wind on live loads according to AASHTO. |
Table 1: Lane Position
| 1 | Navigate to Loads > Wind Load > Wind Load on Live Load > Lane Position |  |
| 2 | Click three-dots icon on Bridge cell. Assign "Bridge1" three times. The reason for this is that there are three lanes on the bridge. | |
| 3 | Enter Start & End Station [ft] as in the figure. |  |
| 4 | Enter the transverse offset value for each lane to influence the live wind load on the centers of the 3 available lanes. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Navigate to Lane Position under Loads on the tree view. |
| 2 | Copy related Geometry from model inputs and paste into OpenBrIM. |
...
| Info |
|---|
Table 2: Wind Load on Live Load AASHTO
| 1 | Navigate to Loads > Wind Load > Wind Load on Live Load > Wind Load on Live Load AASHTO | |
| 2 | ||
| 3 |