Versions Compared

Version Old Version 2 New Version 3
Changes made by

mert.goktas

mert.goktas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1

Navigate to Loading > Construction > Substructure > Pier Cap/Bent Construction (Partial)

2

Click three-dots icon on Stage cell and click select.

3

Select "BridgeConst" as stage.

4

Click three-dots icon on Pier Caps/Bents cell and set as EndBent1

In this section, we did not select all Pier Caps/Bents at the same time. This is because these related structures will be builded partial.

5

Keep the default parameter values without making any changes.

Image Added
67

Please repeat the previous steps for all the Pier Caps/Bents in the project.

Image Added

...

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
nameCopyPaste
nopaneltrue

1

Navigate to Pier Cap/Bent Construction under Substructure on the tree view.

2

Copy Pier Pier Cap/Bent Construction from model inputs and paste into OpenBrIM.

...

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
namePasteTip
nopaneltrue

Anchor
ModelInputs
ModelInputs

Pier Pier Cap/Bent Construction

General

Code Block
languagexml
EndBent1Const	BridgeConst	EndBent1	0.0000	Left	1.0000
EndBent2Const	BridgeConst	EndBent2	0.0000	Left	1.0000
PierCap1Const	BridgeConst	PierCap1	0.0000	Left	1.0000
PierCap2Const	BridgeConst	PierCap2	0.0000	Left	1.0000