Versions Compared

Version Old Version 1 New Version 2
Changes made by

mert.goktas

mert.goktas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

Please follow the instructions provided below to add surface and the corresponding load definitions.

Navigate to Loads > Surface Load

Image Added

Click on the three-dots icon in the surface cell, and set Span1DeckSurface to identify the construction stages that have a surface load.

Define surface loads for each span in the project.

Then enter the names.

Image Added

Click three-dots icon on Stage cell and click select.

Enter the stage data as follows:

  • SIPLoad_Sp1: DeckConstPour

  • SIPLoad_Sp2: DeckConstPour

  • SIPLoad_Sp3t: DeckConstPour

Image Added

Image Added

Enter the magnitudes of the (Surface) Loads to be applied on Surface as in the figure.

Image Added

In this cell, set the Element's object, which indicates which surface load will be applied to each surface.

Image Added

...

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
nameCopyPaste
nopaneltrue

1

Navigate to Surface Load under Loads on the tree view.

2

Copy General from model inputs and paste into OpenBrIM.

...

Anchor
ModelInputs
ModelInputs

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
namePasteTip
nopaneltrue

Surface Load

General

Code Block
languagexml
SIPLoad_Sp1	Span1DeckSurface	DeckConstPour	0.0000	0.0000	0.0750	0.0000	0.0000	0.0000	Deck
SIPLoad_Sp2	Span2DeckSurface	DeckConstPour	0.0000	0.0000	0.0750	0.0000	0.0000	0.0000	Deck
SIPLoad_Sp3	Span3DeckSurface	DeckConstPour	0.0000	0.0000	0.0750	0.0000	0.0000	0.0000	Deck