| Info |
|---|
Please follow the instructions provided below to add the pier columns. |
| 1 | Navigate to Pier > Pier Column |  |
| 2 | Click three-dots icon on the Cap cell and set pier caps according to project. Then enter the name as Pier_1 | |
| 3 | Click three-dots icon on the Section Data and click edit. Enter the section data as follows for Pier_1
|  |
| 4 |  | |
| 5 | Enter Transverse Offset [ft], Rotation Angle [deg] and Bottom Elevation [ft] data as in the figure. |  |
| 6 | Navigate to FEM tab. |  |
| 7 | Enter Mesh Size [ft] as 2 | |
| 8 | Repeat the previous steps and identify all existing pier columns in the project. |  |
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Navigate to Pier Columns under Pier on the tree view. |
Copy Column from model inputs and paste into OpenBrIM. |
Navigate to FEM under Pier on the tree view. |
Copy FEM data from model inputsand paste into OpenBrIM. |
| Tip |
|---|
The pier columns that have been created are illustrated below. |
...
| Anchor | ||||
|---|---|---|---|---|
|
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Pier Column | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Column | FEM | ||||||||||
|
| ||||||||||
Section Data | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
for Pier_1 | for Pier_2 | for Pier_3 | for Pier_4 | ||||||||||||||||||||
|
|
|
| ||||||||||||||||||||