This part is to inform about the general purposes of section definitions.
...
| Info |
|---|
Please follow the instructions provided below to set section definitions to be used in this bridge example. |
Navigate to Properties > Sections |  |
To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section". | |
Select OpenBrIM Bridge Objects > Precast I Girder Sections > FDOT I BEAMS > FIB36 Assign Material as: Fc_8_1/2ksi Select OpenBrIM Bridge Objects > Precast I Girder Sections > FDOT I BEAMS > AASHTO_TYPE_III_BEAM Assign Material as: Fc_6ksi OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 14X89 Assign Material as: A709_50W OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 14X89 Assign Material as: A709_50W OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 18X135 Assign Material as: A709_50W OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHSS8X4X.375 Assign Material as: A500_B |  |
 | |
 | |
Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Circle | 
|
Enter Radius as 18 in import section editor. | |
Click Import | |
Assign Material as Fc_4ksi (If the material Fc_4ksi is already assigned by default, there is no need to assign it again) | |
Rename this section as Circle_exist_shaft_EB | |
Repeat the same steps from 2 to 7 for the second other basic section.
Rename this section as Circle_exist_shaft_Pier Assign Material as Fc_4ksi |  |
