Content Comparison

...

1	With the "FEA" view activated; → Select "Composite Forces" from the drop-down menu. This option allows you to visualize the FEComposite results of the members based on the corresponding analysis results in the form of: i) load cases, ii) construction stages iii) load combinations/envelopes
2	…for the specific member you are interested in. → After specifying the member, click on the "Show" button to display the corresponding results.
3	🔎 Viewing results graphically:
4	→ Set each drop-down menu with your desired form of analysis results, specifically selecting the options that you want to be demonstrated graphically.
5	🔍 Viewing results numerically:
6	→ To switch to the "FEA" tab located on the lower-left side, simply click on it.
7	→ Upon switching to the "FEA" tab, you will find a variety of FE results listed under the "Results" section of the tree-view.
8	→ Navigate to the "Composite Element Forces (Sectional)" option. On the “Data” spreadsheet, the results will be reported for: i) load cases, ii) construction stages iii) load combinations/envelopes
9	……for the specific member you are interested in.

...

→ Navigate to the "Composite Element Forces (Sectional)" option.

On the “Data” spreadsheet, the results will be reported for:
i) load cases,
ii) construction stages
iii) load combinations/envelopes

1	With the "FEA" view activated; → Select "Model" from the topmost drop-down menu.
2	→ Select "Construction Stages" from the subsequent drop-down menu.
3	→ Select the specific construction stage that you are interested in from the lowermost drop-down menu.
4	🔎 Viewing results incrementally:
5	→ Set each drop-down menu with your desired form of analysis results, specifically selecting the options that you want to be demonstrated graphically.	Image Removed	6	By default, the stage results are displayed incrementally in the spreadsheet, with the column headers labeled as "Incremental Force". The FE model also reflects only the members that have been constructed up to that particular stage. On the right side, you will find a three-dot button, which provides options of viewing the cumulative stage results.	Image Added
6	To display all structure, simply click on that button.	Image AddedImage Added
7	🔍 Viewing results cumulatively:
78	→ To switch to the "FEA" tab located on the lower-left side, simply click on it.	Image Removed
8	→ Upon switching to the "FEA" tab, you will find a variety of FE results listed under the "Results" section of the tree-view.	Image Removed
9	Image Removed
10	……for the specific member you are interested in.	Image Removed

Incremental Results

...

viewing the cumulative results for a specific stage, click on the three-dot button provided and select the "Display Cumulative Results" option.

This will update the displayed results in the spreadsheet to show the cumulative load effects of all the stages up to the selected stage.

Cumulative load effects could further be filtered by utilizing the option “Filter Cumulative Results by Load Type”.

To further filter the display of cumulative load effects, you can utilize the option "Filter Cumulative Results by Load Type".

This action will update the displayed results in the spreadsheet to show the cumulative load effects specifically for the selected load type.