| 1 | Click New from the left sidebar. |  |
| 2 | Click Empty Projects template. |  |
| 3 | Click FEA Workflow to create a new project. |  |
| 4 | Enter the project name and the category. |  |
| 5 | Follow the workflow to enter data. |  |
| 6 | Enter X, Y and Z as 0. |  |
| 7 | Click on the icon above the analysis icon from the left sidebar. |  |
| 8 | Click the FEA icon. |  |
| 9 | Click on the DOF tab. |  |
| 10 | Click on the three-dots icon next to Tx, Ty, Tz, Rx, Ry, and Rz and set Fixed. |   |
| 11 | Set the values for Tx, Ty, Tz, Rx, Ry, and Rz. |  |
| 12 | Go to Geometry > Lines |  |
| 13 | Click on the three-dots icon on Node 1 and select a node. |  |
| 14 | Set the other node in the same way to create a line. |  |
| 15 | Click on the three-dots icon next to Name and select Break. |  |
| 16 | Set the number of segments along local X. |   |
| 17 | Go to Properties > Materials |  |
| 18 | Click on the three-dots icon next to Name and select Import Material. | 
|
| 19 | Go to Properties > Sections |  |
| 20 | Click on the three-dots icon next to Name and select Import Section. |   |
| 21 | Go to Geometry > Lines |  |
| 22 | Click on the three-dots icon next to Section at Start and select a section. |   |
| 23 | Go to Loads> Static Loads> Nodal Loads |  |
| 24 | Click on the three-dots icon next to Node and select a node. |   |
| 25 | Click on the three-dots icon next to Load Case and select a load case. |  |
| 26 | Enter Fz as -5. |  |
| 27 | Click on the model text under the settings icon in the left sidebar. |   |
| 28 | Select the Loading text. | |
| 29 | Click Analysis from the left sidebar. |   |
| 30 | Click on the loading text under the settings icon in the left sidebar. |  |
| 31 | Select the Deformed text. |  |
| 32 | Go to Loads> Results> Node Displacements |  |
| 33 | Go to Loads> Results> FELine Forces |   |
...