Content Comparison

Click New from the left sidebar.

Click Empty Projects template.

Click FEA Workflow to create a new project.

Enter the project name and the category.

Follow the workflow to enter data.

Enter X, Y and Z as 0.

Click on the icon above the analysis icon from the left sidebar.

Click the FEA icon.

Go to Geometry > Nodes

Click on the DOF tab.

Click on the three-dots icon next to Tx, Ty, Tz, Rx, Ry, and Rz.

Set the values for Tx, Ty, Tz, Rx, Ry, and Rz.

Go to Geometry > Lines

Click on the three-dots icon on Node 1 and select a node.

Set the other node in the same way to create a line.

Click on the three-dots icon next to Name and select Break.

Set the number of segments along local X.

Go to Properties > Materials

Click on the three-dots icon next to Name and select Import Material.

Go to Properties > Sections

Click on the three-dots icon next to Name and select Import Section.

Go to Geometry > Lines

Click on the three-dots icon next to Section at Start and select a section.

Go to Loads> Static Loads> Nodal Loads

Click on the three-dots icon next to Node and select a node.

Click on the three-dots icon next to Load Case and select a load case.

Enter Fz as -5.

Click on the model text under the settings icon in the left sidebar.

Select the Loading text.

Click Analysis from the left sidebar.

Click on the loading text under the settings icon in the left sidebar.

Select the Deformed text.

Go to Loads> Results> Node Displacements

Go to Loads> Results> FELine Forces