Content Comparison

Click New from the left sidebar.

Click Empty Projects template.

Click FEA Workflow to create a new project.

Enter the project name and the category.

Follow the workflow to enter data.

Enter X, Y and Z as 0.

Click on the icon above the analysis icon from the left sidebar.

Click the FEA icon.

Create additional nodes, namely N2, N3, and N4, with parameters X set to 300, 660, and 960, respectively.

Go to Geometry > Lines

Click on the three-dots icon on Node 1 and select a node.

Set the other node in the same way to create a line.

Repeat the same to create other lines.

Click on the three-dots icon next to Name and select Break.

Set the number of segments along local X.

Repeat the same process for the other lines.

Go to Properties > Materials

Click on the three-dots icon next to Name and select Import Material.

Go to Properties > Sections

Click on the three-dots icon next to Name and select Import Section.

Click on the three-dots icon next to Material and select a material.

Go to Geometry > Lines

Click on the three-dots icon next to Section at Start and select a section.

Repeat the same process for the other lines.

Click on the settings icon in the left sidebar and then select Display Section View.

The properties of the line object can be changed from other tabs.

Go to Geometry > Nodes

Click on the DOF tab.

Click on the three-dots icon next to Tx, Ty, Tz, Rx, Ry, and Rz.

Set the values for Tx, Ty, Tz, Rx, Ry, and Rz.

Go to Loads> Static Loads> Nodal Loads

Click on the three-dots icon next to Node and select a node.

Click on the three-dots icon next to Load Case and create a load case.