Changing Web Dimension

Info
Please follow the instructions provided below to change girder web dimensions.

1	Example model to experience the steps from 1 to 4	Example Model : https://openbrim.org/objidu3bpie4l0mjtmkj54bxb5.project?prj=objidu3bpie4l0mjtmkj54bxb5&active=GraphicsView
2	Go to the 'Plate Girder' object in the workflow.
3	Click on the 'Web Depth' input cell of the girder you want to change the web depth. Then, click on the three dots that appear on the right side of the cell. After that, click on 'Edit (Spreadsheet)'.
4	In the newly opened spreadsheet, we can define the 'Web Depth' parameter as station dependent. After the definition is done, press the 'Back' button to apply the changes to the project. You can also define other parameters of the girder as station dependent.

...

Align Cross-Frame Skew with Support Line Skew

Info
Please follow the instructions provided below to align the cross-frame skew with the support line's skew.

1	Example model to experience the steps from 1 to 4	Example Model : https://openbrim.org/platform/?application=app&prj=objida5tdt4qqgc9xvelekk7x&active=GraphicsView
2	Click on the 'Support Line' object in the workflow to set the skew angle.	Image Added
3	When the skew angle value of 'Abut 1' is zero, it appears like this.	Image Added
4