...
...
Reinforcements
Reinforcements
All analytical beams have listed In the "Reinforcements" section, you will find a list of all analytical beams presented in the spreadsheet and . Additionally, the beam sections are shown visually displayed in the drawing space, as illustrated depicted in Figure 2. This allows for a comprehensive view of the beams and their corresponding sections, aiding in the design and reinforcement process.
...
Figure 21
AEC | BOLT Building Design Suite enables user to create layered rebar templates or arbitrary rebar templates easily.
...
→ Click Create New Template cell of Show Layered Rebar Templates column of desired analytical beamin the spreadsheet as illustrated in Figure 32.
...
Figure 32
This short cut will assign the template directly to selected analytical beam but user can assign the created template to other beams.
...
Figure 43
→ Select the transverse reinforcement in the spreadsheet
...
→ Click Reinforcements button shown in Figure 4 3 to go back to reinforcements spreadsheet
...
Show button will open the longitudinal reinforcement spreadsheet as illustrated in Figure 54
...
Figure 54
→ Click Add to add rebar layer
...
→ Click Create New Template cell of Show Arbitrary Rebar Templates column of desired analytical beam in the spreadsheet as illustrated in Figure 65.
...
Figure 65
This short cut will assign the template directly to selected analytical beam but user can assign the created template to other beams.
...
Figure 76
→ Select the transverse reinforcement in the spreadsheet
...