Content Comparison

Panel

Follow the below steps to add foundation.

1

Go to Rectangular under Foundation on the tree view.

2

Click three-dots icon on Substructure.

3

Pick pier column/columns.

4

Edit Footing properties on the spreadsheet.

5

Click three-dots icon on Material and set a concrete material for footing.

6

Mesh size and number of strips for both directions can be entered in FEM tab.

7

Expand

title	Quick Tip

Longitudinal Offset = It offsets the foundation along the alignment.

Transverse Offset = It offsets the foundation on the y-axis perpendicular to the alignment.

Rotation = It rotates the XY plane.

Expand

title	Quick Tip

Info
Follow the below steps to link the inputs to each other.

Go back to Support Lines tab at the Bridge Geometry.
Enter the skew angle 30 for the Pier2. Internal parameter name used for skew angle is s_skew.
Go to Rotation parameter at the Rectangular Foundation tab.
Enter '=Pier2.s_skew'.
Rotation parameter is the same as skew parameter of the support lines.
As the skew parameter changes, the rotation parameter will also change.

Insert excerpt

1	Go to Rectangular under Foundation on the tree view.
2	Copy Footing from model inputs and paste into OpenBrIM.
3	Go to FEM under Rectangular on the tree view.
4	Copy FEM data from model inputsand paste into OpenBrIM.

Tip
Completed rectangular footing is illustrated below.

Insert excerpt

Anchor

	ModelInputs
	ModelInputs

Rectangular

Footing

Code Block
Footing1 [PierColumn1,PierColumn2,PierColumn3,PierColumn4] 44 20 6 0 0 FcCube_4ksi 0 Footing2 [PierColumn5] 44 24 6 0 0 FcCube_4ksi 0

FEM

Code Block
Footing1 Yes RigidSection 10 3 4 Footing2 Yes RigidSection 10 3 4

Piles

Versions Compared