Content Comparison

General

Code Check Template:The code check template is utilized to extract global parameters, results from finite element analysis, and limit states employed in the design process.

Pier Footing: Pier footing for code check.

Distance in Longitudinal Direction From Centroid: This parameter is utilized to identify the location for code checking. The results are extracted from this location, and the extracted FEComposite results are used in computations. The longitudinal direction refers to the direction along PGL.

Distance in Transverse Direction From Centroid: This parameter is utilized to identify the location for code checking. The results are extracted from this location, and the extracted FEComposite results are used in computations.The transverse direction refers to the direction perpendicular to PGL.

Check For: In certain situations, the user may only wish to verify flexure in certain regions. For instance, the area located beneath a pier may be excluded from the shear check.

Flexural Reinforcements

Reinforcement Material:

Longitudinal Direction Reinforcements

The longitudinal direction refers to the direction along PGL.

• Top or Bottom

• Rebar Profile

• Spacing of Reinforcements

• Distance to Extreme Fiber

Transverse Direction

The transverse direction refers to the direction perpendicular to PGL.

• Top or Bottom

• Rebar Profile

• Spacing of Reinforcements

• Distance to Extreme Fiber

Shear Reinforcements

Shear Reinforcement Profile in Longitudinal: The longitudinal direction refers to the direction along PGL.

Shear Reinforcement Profile in Transverse: The transverse direction refers to the direction perpendicular to PGL.

Spacing in Longitudinal Direction

Spacing in Transverse Direction

No. of Legs in Longitudinal Direction

No. of Legs in Transverse Direction

Shear Reinforcement[Include/Ignore]: If no shear reinforcement is necessary or defined, the user should select "ignore" here. This will deactivate all shear reinforcement inputs.