Content Comparison

Inputs

Pile Cap: (optional)Choose the pile cap to impose the nodal load on the top node of all piles.

Individual Piles: (optional)Stage: (optional)Select individual piles to apply the nodal load on their top node.

Stage: Select a stage to apply the load.

Fx [kip]: Force in X direction. The longitudinal direction along the alignment will correspond to the X direction.

Fy [kip]: Force in Y direction. The transverse direction along the alignment will correspond to the X direction.

Fz [kip]: Force in Z direction. A positive value will apply the load in the gravity direction, while a negative value will apply the load in the opposite direction.

Mx [kip-ft]:

My [kip-ft]:

Mz [kip-ft]: