...
Include Haunch For Section Properties[Yes/No]: According to DOT requirements, haunch area may or may not be included in the sectional property computations. When haunch is included, it increases the inertia and section modulus and decreases the stress values, making the calculation less conservative. When the option "Include Haunch for Section Properties" is set to "No", the dimensions of the haunch are still used to determine the locations of the deck and girder sections. As a result, entering a larger haunch depth can lead to a higher section modulus, even though the option to include the haunch is set to "No".
Appendix B6
This Article shall apply for the calculation of redistribution moments from the interior-pier sections of continuous span I-section flexural members at the service and/or strength limit states. These provisions shall apply only for I-section members that satisfy the requirements of Article B6.2.These optional provisions provide a simple rational approach for calculating the moment redistribution from interior-pier sections due to the effects of yielding. This approach utilizes elastic moment envelopes and does not require the direct use of any inelastic analysis methods. The restrictions of Article B6.2 ensure significant ductility and robustness at the interior-pier sections.
...