| Info |
|---|
Please follow the instructions provided below to create Pier Cap code check |
| 1 | Navigate Templates for Code Check > Pier Cap Code Check |  |
| 2 | For Internal Cross Frame code check, 1 Load Combination Tables must be defined. | |
| 3 | Click three-dots icon on Load Combination Table and set SubstructureLCT. Since the Pier Cap is a substructure element, the appropriate Load Combination Table to assign would be "SubstructureLCT". |  |
| 4 | Keep other parameters constant as follows. | 
|
| 5 | “Procedures for Shear Resistance Parameters ß and θ ..”: Generalized | |
| 6 | “Include acxial effects on flexure and shear computation?” : Yes | |
| 7 | “Flexure Sign (Effective Shear Depth)”: Use Critical Shear Concurrent Bending Moment |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Navigate to Pier Cap Code Check under Templates for Code Check on the tree view. |
| 2 | Copy General from model inputs and paste into OpenBrIM. |
| Tip |
|---|
The Pier Cap Code Check have been created. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Pier Cap Code Check | |||||
|---|---|---|---|---|---|
General | |||||
|