| Info |
|---|
Please follow the instructions provided below to define construction of bridge components. |
| 1 | Navigate Loading > Constucture > Superstructre > Deck |  |
| 2 | You should specify the states of deck construction stage, which include deck pouring and hardening, in this section. | |
| 3 | Click three-dots icon on Pouring Stage (Weight Only) cell. Select all of the stages that are related to Pouring Stage the Deck concrete which were defined in the previous steps. Then enter the names of the deck construction stages in Name. | 
|
| 4 | Click three-dots icon on Hardening Stage (Gains Stiffness) cell. Select the stages at which the Pouring stage will Harden, in the staged concrete pouring process for the deck. Select Hardening Stage (Gains Stiffness) as in the figure | 
|
| 5 | "In the corresponding stage, select the deck that is to be constructed. |  |
| 6 | Navigate to the Longitudinal tab and enter the stations for deck pouring in the longitudinal direction. |  |
| 7 | You can make adjustments to the "Transverse" tab if you wish. |  |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Go to Deck under Superstructure on the tree view. |
| 2 | Copy Deck Casting, Longitudinal and Transverse from model inputs and paste into OpenBrIM. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Deck | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Deck Casting | Longitudinal | Transverse | |||||||||||||||
|
|
| |||||||||||||||