Content Comparison

Navigate to Pier Column on the tree view.

Click three-dots icon on the Pier Cap cell and select a pier cap.

set pier caps according to project.

Then enter the name.

Click three-dots icon on the Section Data and click edit.

Enter the section data as follows for Column1.

• Section Length (Starts from Top) [ft]: 35.25

• Start Section: ColSec_P2

• End Section: ColSec_P2

Repeat the previous steps and enter the section data as follows for Column2 and Column3.

Column2:

• Section Length [ft]: 35.25

• Start Section: ColSec_P2

• End Section: ColSec_P2

Column3:

• Section Length [ft]: 30.58

• Start Section: ColSec_P3

• End Section: ColSec_P3

Image Added

Enter Transverse Offset [ft] and Bottom Elevation [ft] data as in the figure.

You can make adjustments to the "FEM" tab if you wish.

Navigate to Pier Columns under Pier on the tree view.

Copy Column from model inputs and paste into OpenBrIM.

Go to FEM under Pier on the tree view.

Copy FEM data from model inputs and paste into OpenBrIM.

Column

Section Data

FEA

Column1

Column2

Column3