| Info |
|---|
Please follow the instructions provided below to create Internal Diapgrahm. |
| 1 | Navigate to Bracing > Internal Diaphragm |  |
| 2 | To define "Internal Diaphragm" inside Tub Girders: Click three-dots icon on Girder cell and set the Tub Girder which the inner Diaphragm will be located | |
| 3 | The Internal Diaphragms will be placed at the same station as the External Diaphragms. Therefore, it can be inferred that there are a total of 10 Internal Diaphragms in this case. |
|
| 4 | Enter in Location parameters, such as the Skew Angle, Station, materials and selecting just as in the External Diaphragm's value. | |
| 5 | You can make adjustments to the "Section Details" and "3D Details" tabs if you wish. |   |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Navigate to Internal Diaphragm under Bracing on the tree view. |
| 2 | Copy Location, Section Details and 3D Details from model inputs and paste into OpenBrIM. |
| Tip |
|---|
The Internal Diaphragm that have been created are illustrated below. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
External Diaphragm | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Location | Section Details | 3D Details | |||||||||||||||
|
|
| |||||||||||||||