...
| 1 | Navigate Connections > Bolted Field Splice |  | |||||
| 2 | Setthe Girder according to Project. | ||||||
| 3 | Enter the Station data. |  | |||||
| 4 | Navigate to Web Splice tab. Set to Plate Material as A709_50W. |  | |||||
| 5 | Navigate to Top Flange Splice tab. Set to Plate Material as A709_50W. |  | |||||
| 6 | Navigate to Bottom Flange Splice tab. Set to Plate Material as A709_50W. |  | |||||
| 7 | Navigate to Bolts tab and click three-dots icon on Web Bolt Property and Flange Bolt Property cell. Set to Web Bolt Property as BWeb. Set to Flange Bolt Property as Flange Bolt Property. |  | |||||
| 8 |
| ||||||
| 9 | To enable or disable the display of splice bolts, edit the "Show Bolts" parameter. |  | |||||
| 10 | To activate the detailing feature, click on the "Detailing" icon located at the upper-middle part of the page. |  | |||||
| 11 |
| ||||||
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Navigate to Bolted Field Splice under Connections on the tree view. |
| 2 | Copy Girder, Web Splice, Top Flange Splice, Bottom Flange Splice and Bolts from model inputs and paste into OpenBrIM. |
| Tip |
|---|
The Deck bolted field splice that have been created are illustrated below. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Bolted Field Splice | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Girder | Web Splice | Top Flange Splice | Bottom Flange Splice | Bolts | |||||||||||||||||||||||||
|
|
|
|
| |||||||||||||||||||||||||