Versions Compared

Version Old Version 1 New Version 2
Changes made by

mert.goktas

mert.goktas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

Please follow the instructions provided below to define the reference support lines where the piers will be located.

1

Navigate to Bridge Geometry > Support Lines

Image Added

2

To create the support line at Station 0 for the Bridge, click on the three-dot icon located on the first cell of the Bridge and set it to "BRG1".

3

Repeat the same process to create the other support lines at their respective stations. Set the support line for Pier2 at Station 160, for Pier3 at Station 360, and for Abut4 at Station 520.

Expand
titleQuick Tip

Offset values use PGL as the reference poin

Image Added

...

Follow the below steps to copy and paste all inputs from our data set.

Navigate to Support Lines under Bridge Geometry.

Copy Bridge Parameters from model inputs and paste into OpenBrIM.

...

Tip

Completed Support Lines are illustrated below.

...

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
namePasteTip

Support Lines

Bridge Parameters

Code Block
languagexml
Abut1	BRG1	0	0	0
Pier2	BRG1	160	0	0
Pier3	BRG1	360	0	0
Abut4	BRG1	520	0	0