...
| 1 | Click TributaryAreaTest category, open LiveLoadReductionToType LiveLoadReductionLoadType model in BDS. |   |
| 2 | Click Analysis, AEC|BOLT, Tributary button respectively. Run tributary analysis. |  |
| 3 | Click Analysis Results, column results button, choose Select Results To View. |  |
| 4 | Choose Tributary, Live Load, HeavyLiveLoad, GroupA, PassengerVehicleGarage. |  |
| 5 | Check C1 results seen in the figure. |  |
| 6 | Check C2 results seen in the figure. |  |
| 7 | Check C3 results seen in the figure. |  |
| 8 | Check C4 results seen in the figure. |  |
| 9 | Click showing w/o LL Reduction image. |  |
| 10 | Check C1 results seen in the figure. |  |
| 11 | Check C2 results seen in the figure. |  |
| 12 | Check C3 results seen in the figure. |  |
| 13 | Check C4 results seen in the figure. |  |
| Tip |
|---|
Verifies live load reduction for different load classes: , Live Load, HeavyLiveLoad, GroupA, PassengerVehicleGarage. |
Table 2. Live Load Max Reduction Example
| 1 | Click TributaryAreaTest category, open LiveLoadMaxReduction model in BDS. |   |
| 2 | Click Analysis, AEC|BOLT, Tributary button respectively. Run tributary analysis. | |
| 3 | Click Analysis Results, column results button, choose Select Results To View. | |
| 4 | Choose Tributary, Live Load. |  |
| 5 | Check Fx results seen in the figure. |  |
| 6 | Click showing w/o LL Reduction image. | |
| 7 | Check Fx results seen in the figure. |  |
...