Content Comparison

Panel

Follow the next steps to define deck cross-sections.

1	You need to define at least 2 deck cross-sections along the deck.
2	Pick 1^stand 2^nd Support Lines with no longitudinal offsets.	Image Modified
3	Pick 1^stand 2^nd Support Lines with no longitudinal offsets.	4	Go to Deck Cross Section tab.
54	Pick the Girders for haunch locations.
65	Enter the deck dimensions.

Insert excerpt

1	Go to Cross-Section under Deck on the tree view.
2	Copy Location, Deck Cross Section from model inputs and paste into OpenBrIM.

Tip
Completed deck cross section is illustrated below.

Panel

Follow the next steps to define concrete deck.

1

Go to Concrete Deck on tree view.

2

Pick Cross-sections graphically.

3

Import deck Material and assign it.

4

Expand

title	Quick Tip

You can view the previously imported materials in Properties->Materials on the tree view.

Insert excerpt

1	Go to Concrete Deck under Deck on the tree view.
2	Copy General from model inputs and paste into OpenBrIM.

Tip
Completed deck cross section is illustrated below.

Anchor

	ModelInputs
	ModelInputs

Insert excerpt

Deck Cross-Section

Concrete Deck

Location

Code Block
DCS1 Abut1 0 DCS2 Abut4 0

Deck Cross Section

Code Block
DCS1 [G1,G2,G3,G4] 486 45 9 9 9 DCS2 [G1,G2,G3,G4] 486 45 9 9 9

General

Code Block
Deck1 [DCS1,DCS2] FcCube_4ksi

Versions Compared