| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define deck cross-sections. |
| 1 | You need to define at least 2 deck cross-sections along the deck. | |
| 2 | Pick 1st and 2nd Support Lines with no longitudinal offsets. | -20221008-064439.png?version=1&modificationDate=1665211500107&cacheVersion=1&api=v2) |
| 3 | Pick 1st and 2nd Support Lines with no longitudinal offsets. | |
| 4 | Go to Deck Cross Section tab. | -20221008-064648.png?version=1&modificationDate=1665211641010&cacheVersion=1&api=v2) |
| 5 | Pick the Girders for haunch locations. | |
| 6 | Enter the deck dimensions. |  |
| 7 | Follow the steps below to match the same inputs as illustrated model. | |
| 8 | Go to Cross-Section under Deck on the tree view. | |
| 9 | Copy Location, Deck Cross Section from model inputs and paste into OpenBrIM. | |
| Tip |
|---|
Completed deck cross section is illustrated below. |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define concrete deck. |
| 1 | Go to Concrete Deck on tree view. | -20221008-065120.png?version=1&modificationDate=1665211885247&cacheVersion=1&api=v2) | |||||
| 2 | Pick Cross-sections graphically. |  | |||||
| 3 | Import deck Material and assign it. | -20221008-065251.png?version=1&modificationDate=1665211987026&cacheVersion=1&api=v2)  | |||||
| 4 |
| ||||||
| 5 | Follow the steps below to match the same inputs as illustrated model. | ||||||
| 6 | Go to Concrete Deck under Deck on the tree view. | ||||||
| 7 | Copy General from model inputs and paste into OpenBrIM. | ||||||
| Tip |
|---|
Completed deck cross section is illustrated below. |
| Anchor | ||||
|---|---|---|---|---|
|
| Expand | ||
|---|---|---|
| ||
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.   |
Deck Cross-Section | Concrete Deck | |||||||
|---|---|---|---|---|---|---|---|---|
Location
| Deck Cross Section
| General
| ||||||