Versions Compared

Version Old Version 12 New Version 13
Changes made by

Orkun Gülel

Orkun Gülel

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
ExpandtitleSpread Sheet
Info

Follow the next steps to add the pier columns

1

Go to Pier Column on the tree view

Image Added

2

Click three-dots icon on the Pier Cap cell and select a pier cap

3

Click three-dots icon on the Section Data and click edit

Image Added
4

Follow section import instructions that given previously.

Image Added
5

The column has the same section from top to bottom, so there is no need to define a section variation along the column length.

6

Enter Section Length starting from top

7

Select Start & End Sections

8

Go to FEM tab and set Rigid Section

Image AddedImage Added

Tip

     Completed pier columns is illustrated below

Image Added

Image Added

Pier Column

FEA

Column

Code Block
PierColumn1	PierCap1	[[600, PierColumnCircle, PierColumnCircle]]	16.5	0	-40
PierColumn2	PierCap1	[[600, PierColumnCircle, PierColumnCircle]]	5.5	0	-40
PierColumn3	PierCap1	[[600, PierColumnCircle, PierColumnCircle]]	-5.5	0	-40
PierColumn4	PierCap1	[[600, PierColumnCircle, PierColumnCircle]]	-16.5	0	-40
PierColumn5	PierCap2	[[600, PierColumnRec, PierColumnRec]]	0	0	-40

Section Data

Code Block
50	PierColumnCircle	PierColumnCircle

Section data is the same for PierColumn1,PierColumn2,PierColumn3,PierColumn4

Section Data

Code Block
50	PierColumnRec	PierColumnRec

Section data for PierColumn5

Code Block
PierColumn1	Yes	10
PierColumn2	Yes	10
PierColumn3	Yes	10
PierColumn4	Yes	10
PierColumn5	Yes	10

Info

Follow the next steps to add the pier columns

1

Go to Pier Column on the tree view

Image Removed

2

Click three-dots icon on the Pier Cap cell and select a pier cap

3

Click three-dots icon on the Section Data and click edit

Image Removed4

Follow section import instructions that given previously.

Image Removed5

The column has the same section from top to bottom, so there is no need to define a section variation along the column length.

6

Enter Section Length starting from top

7

Select Start & End Sections

8

Go to FEM tab and set Rigid Section

Image RemovedImage Removed

Tip

     Completed pier columns is illustrated below

Image Removed

Image Removed

Insert excerptPier CapsPier CapsnameCopyPastenopaneltrue