...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to set boundary conditions for each bearing location (insertion point) that you have defined while creating the bridge layout. |
| 1 | Go to |
Bearing Fixity on the tree view next to data spreadsheet. |
Enter Section Length along Y-Y starting from right
Select Start Section and End Section
Go back to pier cap, select Slope Option as alignment
Edit Top Elevation Offset from Alignment value
Go to FEM tab and select a section for Rigid Section
 |
| 2 |
Click three-dots icon on the Location cell and select a support line
Click three-dots icon on the Section Data cell and click Edit
Set Tx/Ty/Tz/Rx/Ry/Rz. | |||||||
| 3 | Set Transfer Force to Substructure as Yes for interior pier locations. | ||||||
| 4 | Set Transfer Force to Substructure as No for start and end support locations. | ||||||
| 5 |
| ||||||
| 6 | Follow the steps below to match the same inputs as illustrated model. | ||||||
-20221006-152115.png?version=1&modificationDate=1665069687433&cacheVersion=1&api=v2)
Go to Pier Cap under Pier on the tree view
| 7 | Copy Articulation from model inputs and paste into OpenBrIM. | |
Go to FEM under Pier on the tree view
...
| Anchor | ||||
|---|---|---|---|---|
|
| Expand | ||
|---|---|---|
| ||
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.   |
Bearing Fixity | ||
|---|---|---|
Articulation
|