Panel | ||||||
---|---|---|---|---|---|---|
| ||||||
Follow the next steps to create K Top type and X type cross-frames. |
1 | Pick 2 Girders that the cross frame will be placed between. | |
2 | Enter the Station of the cross frame. | |
3 | Go to Sections tab. | |
4 | Import AISCL8X8X3/4 and assign it to Top & Bottom & Diagonal Chord Sections. | |
5 | Go to Gusset Plate tab and edit the gusset plate offset values for top, bottom and diagonal plates. | |
6 | Go to Stiffener tab. | |
7 | Edit the vertical stiffener thickness as 0.75 and vertical stiffener width as 7 in. | |
8 | Go to Geometry tab | |
9 | Edit the offset values for top chord, diagonals, and bottom chord. | |
10 | Perform the same steps for X type cross-frames. | |
11 | Follow the steps below to match the same inputs as illustrated model. | |
12 | Go to Cross-frame K Top under Cross Frames on the tree view. | |
13 | Copy Location, Sections, Gusset Plate, Stiffener, Geometry from model inputs and paste into OpenBrIM. | |
14 | Go to Cross-frame X under Cross Frames on the tree view. | |
15 | Copy Location, Sections, Gusset Plate, Stiffener, Geometry from model inputs and paste into OpenBrIM. |
Tip |
---|
Completed cross frames is illustrated below. |
Anchor | ||||
---|---|---|---|---|
|
Expand | ||
---|---|---|
| ||
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste. |
Cross-frame K Top | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Location
| Sections
| Gusset Plate
| Stiffener
| Geometry
|
Cross-frame X | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Location
| Sections
| Gusset Plate
| Stiffener
| Geometry
|