Content Comparison

Go to Roadway Alignment

Enter Start Station as 0

Click the three-dots icon on the cell and Click Editor to define alignment properties

Click icon next to the Horizontal and add a circular segment

Enter Length as 530 ft, Radius as 700 ft, and Direction as Towards Right

You can edit the Vertical data such as grades and elevations of alignment in the Vertical tab. In this example, vertical data of alignment is set to 0

Click icon next to the Transverse to define the alignment cross-section at a specific station

Enter the cross-section Station as 0 ft

Enter the Left Edge to PGL distance as 20 ft. This distance is the length from the left edge to the centerline of the alignment.

Click icon next to the At Sta+0 and add a section component

Enter the Width as 40 ft and Slope as %-5