...
Thin Plate Option - Uniform Load - 2x2 Plate
| Edge Support | Mesh | Model | Output Parameter | OpenBrIM | Sap2000 | Independent | Percent Difference (SAP2000 vs Independent) | Percent Difference (OpenBrIM vs Independent) |
|---|---|---|---|---|---|---|---|---|
Simple | 4x4 | A |
Center of Plate | A1:4.06233 | 4.06 | 4.06 | 0% | A1;0.05748% |
| 16x16 | E | E1: | 4.06 | 0% | E1; | |||
Fixed | 4x4 | B | B1: | 1.32 | 1.26 | 5% | B1; | |
| 16x16 | F | F1: | 1.27 | 1% | F1; |
Thin Plate Option - Uniform Load - 2x10 Plate
| Edge Support | Mesh | Model | Output Parameter | OpenBrIM | Sap2000 | Independent | Percent Difference (SAP2000 vs Independent) | Percent Difference (OpenBrIM vs Independent) |
|---|---|---|---|---|---|---|---|---|
Simple | 4x4 | C |
Center of Plate | C1: | 12.86 | 12.97 | -1% | C1; |
| 16x16 | G | G1: | 12.96 | 0% | G1; | |||
Fixed | 4x4 | D | D1: | 2.60 | 2.60 | 0% | D1; | |
| 16x16 | H | H1: | 2.60 | 0% | H1; |
Thin Plate Option - Center Concentrated Load - 2x2 Plate
| Edge Support | Mesh | Model | Output Parameter | OpenBrIM | Sap2000 | Independent | Percent Difference (SAP2000 vs Independent) | Percent Difference (OpenBrIM vs Independent) |
|---|---|---|---|---|---|---|---|---|
Simple | 4x4 | A |
Center of Plate | A2: | 11.94 | 11.60 | 3% | A2; |
| 16x16 | E | E2: | 11.63 | 0% | E2; | |||
Fixed | 4x4 | B | B2: | 5.90 | 5.60 | 5% | B2; | |
| 16x16 | F | F2: | 5.64 | 1% | F2; |
Thin Plate Option - Center Concentrated Load- 2x10 Plate
| Edge Support | Mesh | Model | Output Parameter | OpenBrIM | Sap2000 | Independent | Percent Difference (SAP2000 vs Independent) | Percent Difference (OpenBrIM vs Independent) |
|---|---|---|---|---|---|---|---|---|
Simple | 4x4 | C |
Center of Plate | C2: | 18.12 | 16.95 | 7% | C2; |
| 16x16 | G | G2: | 17.15 | 1% | G2; | |||
Fixed | 4x4 | D | D2: | 7.79 | 7.25 | 7% | D2; | |
| 16x16 | H | H2: | 7.41 | 2% | H2; |